ASK
ME

REGISTER
NOW

Dr. Ir. Marsul Siregar, M.Eng.

8/30/2023 12:00:00 AM

NIDN

Jabatan Akademik

E-mail

: 0305086003

:

: marsul.siregar@yahoo.com

Biografi

S1 - Universitas Sumatera Utara (1986)
S2 - Tokushima University (1993)
S3 - Tokushima University (1996)

Power System
Control System
Fiber Optic Technology

Dasar Teknik Tenaga Listrik
Energi Terbarukan
Manajemen Projek
Medan Elektromagnetik
Pengantar Distribusi Energi Listrik
Proposal Thesis
Sistem Kendali Cerdas
Tesis

Dr. Marsul Siregar M.Eng., 2019, Design of Net Zero Energy Building (NZEB) for Existing Building in Jakarta
Dr. Marsul Siregar M.Eng., 2019, Implementation of Energy Management Concept and Energy Management System in High Rise Office Building (Case Study in XXX Building Jakarta)
Dr. Marsul Siregar M.Eng., 2019, Implementation of Green Building Concept in Office Building Jakarta
Dr. Marsul Siregar M.Eng., 2020, A New Method for minimizing the Cogging Torque of Permanent Magnet Machine of Integral Slot Number for the Renewable Energy Plants Application
Dr. Marsul Siregar M.Eng., 2020, A New Technique to Reduce the Cogging Torque of Integral Slot Number in Permanent Magnet Synchronous Machine
Dr. Marsul Siregar M.Eng., 2020, Desain dan Implementasi Instalasi Perpipaan untuk Budidaya Lele di Desa Sampora
Dr. Marsul Siregar M.Eng., 2020, Effect of Combination Fractional Slot Number and Slotting Technique on the Cogging Torque in Permanent Magnet Machines
Dr. Marsul Siregar M.Eng., 2020, IMPROVING A COGGING TORQUE REDUCTION TECHNIQUE FOR FRACTIONAL SLOT NUMBERS IN A PERMANENT MAGNET MACHINE
Dr. Marsul Siregar M.Eng., 2020, Increasing the Company Profit by Reduction the Production Cost (case study in an Oil Seal Automotive Manufacturing)
Dr. Marsul Siregar M.Eng., 2020, Investigation the Effect of Stator Slotting Technique and Shaping Magnetic on the Performance of Permanent Magnet Machine
Dr. Marsul Siregar M.Eng., 2020, Novel Cogging Torque Mitigation Method for Permanent Magnet Machine of Integral Slot Number
Dr. Marsul Siregar M.Eng., 2020, Novel of Cogging Torque Reduction Technique for Permanent Magnet Generator by Compounding of Magnet Edge Shaping and Dummy Slotting in Stator Core
Dr. Marsul Siregar M.Eng., 2020, Optimization of Scada Systems in a Remote Area by Using DTM6000 and Trunking Tier Three ( Case study in Papua)
Dr. Marsul Siregar M.Eng., 2020, Optimization of the Energy Management Concept in High Rise Office Building (Case Study in SSS Building Jakarta)
Dr. Marsul Siregar M.Eng., 2020, Optimizing the Cogging Torque Reduction of Integral Slot Number in Permanent Magnet Machine
Dr. Marsul Siregar M.Eng., 2020, Performance Investigation of Permanent Magnet Machine due to the Effect of Height and Length Magnet Edge Slotting of Fractional slot Number
Dr. Marsul Siregar M.Eng., 2020, Reducing the Cogging Torque of Integral Slot Number in Inset Permanent Magnet Generator
Dr. Marsul Siregar M.Eng., 2020, Scada Solution by Installing DTM6000 and Trunking Tier Three
Dr. Marsul Siregar M.Eng., 2020, Study the Effect of Combination of Shoe Height and Slot Opening width to Reduce Cogging Torque in Permanent Magnet Generator
Dr. Marsul Siregar M.Eng., 2020, Two-Steps Slotting Method in Magnet Edge of PMG for Wind Energy Harvesting
Dr. Marsul Siregar M.Eng., 2022, A Case Study of IIoT Application in Process Manufacturing: Management Information Systems in Palm Oil Refinery
Dr. Marsul Siregar M.Eng., 2022, Impact of the HFC migration to FTTH on the efficiency and reliability of the internet provider services business (A case Study)
Dr. Marsul Siregar M.Eng., 2023, Spooling Device Optimization with IP Camera and Active Infrared Sensor